Ejot® H1 eco

Applications

Universal hammer-in anchor

• Approved for all material classes (A, B, C, D, E)
• For all insulation boards
• For surface fixed installation
• With European Technical Assessment (ETA)

Properties

• Approved for concrete, solid and perforated masonry
• Solid steel nail (break-proof)
• Low profile washer face
• Plastic injection element to reduce thermal transmission (0,001 W/K)
• Can be used with an additional spreader washer
• KShort embedment depth, reduced drilling
• High loads for your security
• Economic anchor usage
• Premounted nail for quick installation

Technical specifications

• • Anchor diameter: 8 mm
  • Washer diameter: 60 mm
  • Drill hole depth h₁ ≥: 35 mm 
  • Embedment depth h_ef≥: 25 mm
  • Point thermal transmission χ: 0.001 W/K 
  • Use categories acc. to ETA: A, B, C
  • European Technical Assessment: ETA-11/0192
    • Normal weight concrete C 12/15 acc. to EN 206-1: 0.9 kN
    • Normal weight concrete C 16/20 - C 50/60 acc. to EN 206-1: 0.9 kN
    • Clay bricks (Mz) acc. to DIN 105: 0.9 kN
    • Solid lime sandstone (KS) acc. to DIN EN 106: 0.9 kN
    • Vertically perforated clay brick (Hlz) acc. to DIN 105, bulk density ≥ 1.2 kg/dm³: 0.75 kN
    • Vertically perforated clay brick (Hlz) acc. to DIN 105, bulk density ≥ 0.9 kg/dm³: 0.6 kN
    • Sand-lime perforated (KSL) acc. to DIN EN 106: 0.9 kN

Characteristic loads:

Building material class A:

Building material class B:

Building material class C:

For calculation of design loads the national safety factors have to be included (e.g. Germany: 3). Please observe the approval.